Cisco 1841 - 3G Bundle Router Hardware Installation Manual page 48

Setting Up the Chassis
Figure 4-9
Figure 4-9
1
Wall-mount bracket
Position the power supply in the wall-mount bracket.
Step 2
Orient the front and back of the power supply vertically.
a.
Position the end nearest the power cable at the top.
b.
Assemble the brackets for rack-mounting the power supply as shown in
Step 3
screws provided. Use a number 2 Phillips screwdriver to install the bracket screws.
Figure 4-10
To mount the chassis and power supply, use two screws for each side (supplied with the rack) to attach
the Cisco 1861 ISR with rack-mount brackets, then attach the power supply with rack-mount bracket to
a 19-in. rack. Start the lower pair of screws first, resting the brackets on the lower screws while you insert
the upper pair of screws.
Cisco 1800 Series Routers (Modular) Hardware Installation Guide
4-10
Chapter 4
shows the brackets in the rack-mount kit for the power supply.
Brackets for Rack-Mounting Power Supply
2
1
Assembling Rack-Mount Kit for the Power Supply
Chassis Installation Procedures for Cisco 1800 Series Routers (Modular)
2
Rack-mount bracket
Figure 4-10, using the four
OL-5876-03