Chapter 6 Cable Connection Procedures For Cisco 1800 Series Routers (Modular); Power Connections - Cisco 1841 - 3G Bundle Router Hardware Installation Manual

Cable Connection Procedures for Cisco 1800
Series Routers (Modular)
This chapter describes how to connect your Cisco 1800 series integrated services router (modular) to a
power source and to networks and external devices. It includes the following sections:
•
•
•
For cable information and specifications, see the
Series Routers (Modular)"
To see translations of the warnings that appear in this publication, see the
Note
Safety Information for Cisco 1840

Power Connections

Read the installation instructions before connecting the system to the power source. Statement 1004.
Warning
The installation must comply with all required electrical codes applicable at the installation site.
Note
Connect your router to a 15 A, 120 VAC (10 A, 240 VAC) circuit with overcurrent protection.
The input voltage tolerance limits for AC power are 85 and 264 VAC.
Note
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that
Warning
the protective device is rated not greater than: 15A, 120VAC (10A, 240VAC). Statement 1005
OL-5876-03
Power Connections, page 6-1
Connecting WAN and LAN Cables, page 6-2
Connecting to a Console Terminal or Modem, page 6-3
document.
C H A P T E R
"Cable Information and Specifications for Cisco 1800
Routers.
Cisco 1800 Series Routers (Modular) Hardware Installation Guide
6
Regulatory Compliance and
6-1