Cisco 6941 - Unified IP Phone Slimline VoIP Administration Manual page 87

Chapter
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Audible Message A stutter tone from the handset, headset, or
Waiting Indicator speakerphone indicates that a user has one or more
(AMWI) new voice messages on a line.
Note
Auto Answer Connects incoming calls automatically after a ring
or two.
Auto Answer works with either the speakerphone
or the headset.
Automatic Port When the Cisco Unified CM administrator uses the
Synchronization Remote Port Configuration feature to set the speed
and duplex function of an IP phone remotely, loss
of packets can occur if one port is slower than the
other.
The Automatic Port Synchronization feature
synchronizes the ports to the lowest speed among
the two ports, which eliminates packet loss. When
automatic port synchronization is enabled, it is
recommended that both ports be configured for
autonegotiate. If one port is enabled for
autonegotiate and the other is at a fixed speed, the
phone synchronizes to the fixed port speed.
Note
Auto-pickup Allows a user to use one-touch pickup
functionality for call pickup features.
Block external to Prevents users from transferring an external call to
external transfer another external number.
Busy Lamp Field Allows a user to monitor the call state of a
(BLF) directory number associated with a speed-dial
button on the phone.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
OL-23769-01
The stutter tone is line-specific. You hear it
only when using the line with the waiting
messages.
If both the ports are configured for fixed
speed, the Automatic Port Synchronization
feature is ineffective.
The Remote Port Configuration and
Automatic Port Synchronization features
are compatible only with IEEE 802.3AF
Power of Ethernet (PoE) switches.
Switches that support only Cisco Inline
Power are not compatible. Enabling this
feature on phones that are connected to
these types of switches could result in loss
of connectivity to Cisco Unified CM, if the
phone is powered by PoE.
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
For more information, see the Cisco Unified
Communications Manager System Guide,
Cisco Unified IP Phone.
For more information, see the Cisco Unified
Communications Manager Administration
Guide, Directory Number Configuration.
To configure the parameter in the Cisco
Unified CM Administration application,
choose Device > Phone, select the appropriate
IP phones, and scroll to the Product Specific
Configuration Layout pane.
To configure the setting on multiple phones
simultaneously, enable Automatic Port
Synchronization in either the Enterprise Phone
Configuration (System > Enterprise Phone
Configuration) or the Common Phone Profile
Configuration (Device > Device Settings >
Common Phone Profile).
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide, Call Pickup.
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide, External Call Transfer
Restrictions.
For more information, go to the Cisco Unified
Communications Manager Features and
Services Guide, Presence.
5-3