Lower Viewing Angle; Mounting The Phone To The Wall; Verifying The Phone Startup Process - Cisco 6941 - Unified IP Phone Slimline VoIP Administration Manual
Ip phone for cisco unified communications manager 8.5 (sccp and sip)
Hide thumbs
Also See for 6941 - Unified IP Phone Slimline VoIP:
- Manual to using (7 pages) ,
- Datasheet (5 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
Chapter
Lower Viewing Angle
Mounting the Phone to the Wall
You can mount the Cisco Unified IP Phone on the wall by using special brackets available in a
Cisco Unified IP Phone wall mount kit. For information on installing the wall mount kit, see
Appendix E, "Installing the Wall Mount Kit for the Cisco Unified IP Phones 6921, 6941, 6945, and
6961."
Wall mount kits are ordered separately from the phone.
Note
Verifying the Phone Startup Process
After the Cisco Unified IP Phone has power connected to it, the phone begins its startup diagnostic
process by cycling through the following steps.
1.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
OL-23769-01
The following LED buttons flash on and off during the various stages of bootup as the phone checks
its hardware. See
Table 3-2
for a list of the hardware test and the LED diagnostic status.
Verifying the Phone Startup Process
3-15
Advertisement
Table of Contents
Troubleshooting
