Adding Users To Cisco Unified Communications Manager; Managing The User Options Web Pages; Giving Users Access To The User Options Web Pages - Cisco 6941 - Unified IP Phone Slimline VoIP Administration Manual

Adding Users to Cisco Unified Communications Manager

Adding Users to Cisco Unified Communications Manager
Adding users to Cisco Unified Communications Manager allows you to display and maintain
information about users and allows each user to perform these tasks:
•
•
•
•
You can add users to Cisco Unified Communications Manager using one of these following methods:
•
•
•
•

Managing the User Options Web Pages

From the User Options web page, users can customize and control several phone features and settings.
For detailed information about the User Options web pages, refer to Cisco Unified IP Phone 6921, 6941,
and 6961 User Guide.

Giving Users Access to the User Options Web Pages

Before a user can access the User Options web pages, you must add the user to the standard Cisco
Unified Communications Manager end user group and associate the appropriate phone with the user.
To add the user to the standard Cisco Unified Communications Manager end user group, you must follow
these steps:
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
5-22
Access the corporate directory and other customized directories from a Cisco Unified IP Phone.
Create a personal directory.
Set up speed dial and call forwarding numbers.
Subscribe to services that are accessible from a Cisco Unified IP Phone.
To add users individually, choose User Management > End User from Cisco Unified
Communications Manager Administration.
For more information, see the Cisco Unified Communications Manager Administration Guide,
User Configuration.
To add users in batches, use the Bulk Administration Tool. This method also enables you to set an
identical default password for all users.
For more information, see the Cisco Unified Communications Manager Administration Guide,
Administration.
To add users from your corporate LDAP directory, choose System > LDAP > LDAP System from
Cisco Unified Communications Manager Administration.
Once the Enable Synchronization from the LDAP Server is enabled, you will not be able to
Note
add additional users from Cisco Unified Communications Manager Administration
For more information on LDAP, see the Cisco Unified Communications Manager System Guide,
Understanding the Directory.
To add a user and phone at the same time choose User Management > User/Phone Add from Cisco
Unified Communications Manager.
Chapter
End
Bulk
OL-23769-01