Cisco 6941 - Unified IP Phone Slimline VoIP Administration Manual page 82

IPv4 Setup Menu Options
Table 4-2 IPv4 Setup Menu Options (continued)
Option
Alternate TFTP
TFTP Server 1
TFTP Server 2
DHCP Address
Released
Related Topics
•
•
•
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
4-8
Description
Indicates whether the phone is using an alternative TFTP
server.
Primary Trivial File Transfer Protocol (TFTP) server used
by the phone. If you are not using DHCP in your network
and you want to change this server, you must use the TFTP
Server 1 option.
If you set the Alternate TFTP option to yes, you must enter
a non-zero value for the TFTP Server 1 option.
Optional backup TFTP server that the phone uses if the
primary TFTP server is unavailable.
Releases the IP address assigned by DHCP.
Displaying a Configuration Menu, page 4-2
Unlocking and Locking Options, page 4-3
Editing Values, page 4-3
To Change
Scroll to the Alternate TFTP option
and press the Yes softkey if the phone
should use an alternative TFTP
server; press the No softkey if the
phone should not use an alternative
TFTP server.
If DHCP is enabled, set the
1.
Alternate TFTP option to Yes.
Scroll to the TFTP Server 1
2.
option, press the Edit softkey,
and then enter a new TFTP
server IP address.
3. Press the Apply softkey, then
press Save.
Enter an IP address for the TFTP
1.
Server 1 option.
2. Scroll to the TFTP Server 2
option, press the Edit softkey,
and then enter a new backup
TFTP server IP address.
Press the Apply softkey, then
3.
press Save.
Scroll to the DHCP Address
Released option and press the Edit
softkey, then press the Yes softkey to
release the DHCP Address.
Chapter
OL-23769-01