Cisco TelePresence MX800 Single
Replacement Guide
Contents
Introduction
Grilles and covers
Grilles and covers
Speakers and cameras
Codec and monitor
Appendix
Replace the floor stand covers
The center floor stand cover is click-fastened.
The left and right floor stand covers are fastened
with magnets.
Pull up the center floor stand cover before you
gently lift off the left and right floor stand covers.
Re-assembly:
First, put the left and right floor stand covers back
in place. Then, mount the center floor stand cover.
Spare part:
• CTS-MX800-S-FSK=
D15298.01 MX800 Single Replacement Guide, MARCH 2015.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
9