Block Services From The Internet - NETGEAR Nighthawk RS700 User Manual

Block services from the Internet

You can block Internet services on your network based on the type of service. You can
block the services all the time or based on a schedule.
NOTE: Service blocking works only for services and applications that are using
Transmission Control Protocol (TCP) or User Datagram Protocol (UDP) for
communication.
To block services:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Block Services.
The Block Services page displays.
5. Select when to block the services:
• Per Schedule: Turn on service blocking according to a schedule that you set. For
more information, see Schedule when to block Internet sites and services on page
72.
• Always: Turn on service blocking all the time, independent of the Schedule page.
6. Click the Add button.
The Block Services Setup page displays.
7. To add a service that is in the Service Type menu, select the application or service.
The settings for this service automatically display in the fields.
8. To add a service or application that is not in the menu, select User Defined, and do
the following:
a. If you know that the application uses either TCP or UDP, select the appropriate
protocol. Otherwise, select TCP/UDP (both).
Control Access to the Internet
Nighthawk WiFi 7 Tri-Band Router Model RS700
71 User Manual