Factory Settings - NETGEAR Nighthawk RS700 User Manual

Factory settings

You can return the router to its factory settings. Use the end of a paper clip or a similar
object to press and hold the Reset button on the back of the router for at least 10
seconds. The router resets and returns to the factory configuration settings shown in
the following table.
Table 3. Router factory default settings
Feature
Router login
Router web interface
User name (case-sensitive)
Login password
(case-sensitive) for initial
login
Internet connection
WAN MAC address
WAN MTU size
Port speed
Local network (LAN)
LAN IP address
Subnet mask
DHCP server
DHCP range
DHCP starting IP address
DHCP ending IP address
Time zone
Time adjusted for daylight
saving time
Supplemental Information
Nighthawk WiFi 7 Tri-Band Router Model RS700
Default Settings
www.routerlogin.net (or www.routerlogin.com or 192.168.1.1)
admin
password
Router default hardware address
1500 bytes
Autosensing
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
192.168.1.2
192.168.1.254
North America: Pacific Standard Time
Europe: GMT
Other continents: Varies by region
Disabled
214 User Manual