NETGEAR Nighthawk RS700 User Manual page 29

The page that displays depends on whether you accessed the router before:
• The first time you set up the Internet connection for your router, the browser goes
to http://www.routerlogin.net and the Configuring the Internet Connection
page displays.
• If you already set up the Internet connection, enter http://www.routerlogin.net
in the address field for your browser to start the installation process.
The page that displays recommends that you use the Nighthawk app. However, the
current procedure describes how you can use the router web interface.
4. If the installation process does not start and the browser does not display the page
that recommends that you use the Nighthawk app, do the following:
• Make sure that the computer is connected to one of the Ethernet LAN ports on
the router or over WiFi to the router.
• Make sure that the router is receiving power and that its Power LED is lit.
• Close and reopen the browser or clear the browser cache.
• Browse to http://www.routerlogin.net.
• If the computer is set to a static or fixed IP address (this setting is uncommon),
change it to obtain an IP address automatically from the router.
• Use the Reset button, to reset the router to factory default settings (see Use the
Reset button on page 151).
5. Scroll down and click the If you don't have a compatible smartphone, click here
link.
A welcome page displays.
6. Follow the onscreen instructions.
The router detects your Internet settings.
7. Follow the onscreen instructions to complete the installation process.
Connect to the Router Network
and Access the Router
Nighthawk WiFi 7 Tri-Band Router Model RS700
29 User Manual