Enable Ftp Access Within Your Network - NETGEAR Nighthawk RS700 User Manual

7. For any access method, to require access with the same password that you set the
first time that you logged in to the router, select the associated Admin Password
Protection check box.
NOTE: We strongly recommend that you enable admin password
protection to secure your ReadySHARE data.
To remove the password requirement, clear the associated Admin Password
Protection check box.
8. Click the Apply button.
Your settings are saved.

Enable FTP access within your network

File Transfer Protocol (FTP) lets you download (receive) and upload (send) large files
faster.
For information about setting up FTP access through the Internet so that you can remotely
access the storage device attached to your router, see Set up FTP access through the
Internet on page 170.
To enable FTP access within your network:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > USB Functions > Advanced Settings.
The USB Storage (Advanced Settings) page displays.
5. Select the FTP check box.
6. Click the Apply button.
Share a USB Storage Device
Attached to the Router
Nighthawk WiFi 7 Tri-Band Router Model RS700
160 User Manual