Disable Port Triggering - NETGEAR Nighthawk RS700 User Manual

You can also keep port triggering enabled and disable an individual port triggering
rule.
To disable an individual port triggering rule:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
5. Select the Port Triggering radio button.
The port triggering settings display.
6. In the Port Triggering Portmap Table, clear the check box for the rule that you want
to disable.
7. Click the Apply button.
Your settings are saved. The router does not apply the rule that you disabled.

Disable port triggering

By default, port triggering is enabled. You can disable port triggering temporarily
without removing any port triggering rules. For information about disabling an individual
port triggering rule, see Disable an individual port triggering rule on page 196.
To disable port triggering:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
Manage Port Forwarding and
Port Triggering
Nighthawk WiFi 7 Tri-Band Router Model RS700
197 User Manual