Manage Reserved Lan Ip Addresses; Reserve An Ip Address - NETGEAR Nighthawk RS700 User Manual

The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. Clear the Use Router as DHCP Server check box.
6. Click the Apply button.
Your settings are saved.
7. (Optional) If this service is disabled and no other DHCP server is on your network,
set your device IP addresses manually so that the devices can access the router and
the Internet.

Manage reserved LAN IP addresses

When you specify a reserved IP address for a device on the LAN, that device always
receives the same IP address each time it requests an IP address from the router's DHCP
server (for example, when the device restarts). Assign reserved IP addresses to devices
or servers that require permanent IP settings.

Reserve an IP address

To reserve an IP address:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
Manage the WAN and LAN
Network Settings
Nighthawk WiFi 7 Tri-Band Router Model RS700
102 User Manual