Table of Contents
Advertisement
Set a 6to4 tunnel IPv6 Internet connection
The remote relay router is the router to which your router creates a 6to4 tunnel. Make
sure that the IPv4 Internet connection is working before you apply the 6to4 tunnel
settings for the IPv6 connection.
To set a 6to4 tunnel IPv6 Internet connection:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays.
5. From the Internet Connection Type menu, select 6to4 Tunnel.
The page adjusts.
After you click the Apply button, the router automatically detects the information in
the Router's IPv6 Address on LAN field. This field shows the IPv6 address that is
acquired for the router's LAN interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If
no address is acquired, the field displays Not Available.
6. Select a Remote 6to4 Relay Router radio button:
• Auto: Your router uses any remote relay router that is available on the Internet.
This is the default setting.
• Static IP Address: Enter the static IPv4 address of the remote relay router. Your
IPv6 ISP usually provides this address.
7. Select an IPv6 Domain Name Server (DNS) Address radio button:
• Get Automatically from ISP: Your ISP uses DHCP to assign your DNS servers.
Your ISP automatically assigns this address. This option uses the DNS servers
assigned by the ISP for the IPv6 connection.
Specify Your Internet Settings
Nighthawk WiFi 7 Tri-Band Router Model RS700
46
User Manual
Advertisement
Table of Contents
