Factory Default Settings - NETGEAR C300 User Manual

Factory Default Settings

You can return the modem router to its factory default settings.

To restore the factory default settings:
1. Locate the small hole in the bottom of the modem router.
The Reset button is located inside this hole.
2. Use a paperclip or sharp object to press and hold the Reset button for over seven seconds.
The modem router resets and returns to the factory configuration settings shown in the
following table.
Factory Default Settings
Gateway login
Local network
(LAN)
Firewall
Internet
connection
N300 WiFi Cable Modem Router Model C3000
User login URL
User name and password
(case-sensitive)
LAN IP
Subnet mask
DHCP server
DHCP starting IP address
DHCP ending IP address
Inbound communication from the
Internet
Outbound communication to the
Internet
Source MAC filtering
WAN MAC address
Supplemental Information
Designed by NETGEAR in California
http://192.168.0.1
admin / password
192.168.0.1
255.255.255.0
Enabled
192.168.0.2
192.168.0.254
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Use default hardware address
101