Disable Port Triggering; Remove A Port Triggering Rule - NETGEAR Nighthawk RS400 User Manual

Nighthawk AC2300 Cybersecurity WiFi Router Model RS400

Disable port triggering

By default, port triggering is enabled. You can disable port triggering temporarily
without removing any port triggering rules.
To disable port triggering:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
5. Select the Port Triggering radio button.
The port triggering settings display.
6. Select the Disable Port Triggering check box.
If this check box is selected, the router does not apply port triggering rules even if
you specified them.
7. Click the Apply button.
Your settings are saved.

Remove a port triggering rule

You can remove a port triggering rule that you no longer need.
To remove a port triggering rule:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
Manage Port Forwarding and
Port Triggering Traffic Rules
163 User Manual