Appendix A:color Measurement Instruments; Using The X-Rite Dtp41 Spectrophotometer; Setting Up The Dtp41 - Sharp AR-C360P Color Manual

A
A-97 Color Measurement Instruments
Appendix A:
Color
Measurement
Instruments
To connect the X-Rite DTP41 to the computer
1. Turn off the computer.
2. Unpack the X-Rite DTP41 and remove the spacer from the
This appendix explains how to set up and calibrate the following
color measurement instruments:
• X-Rite DTP41 automatic scanning spectrophotometer
• X-Rite DTP32 automatic scanning densitometer

Using the X-Rite DTP41 spectrophotometer

ColorWise Pro Tools Calibrator supports the X-Rite DTP41
spectrophotometer, a device that measures density and color
data. The DTP41 communicates directly with the Calibrator
application in ColorWise Pro Tools, sending measurements to the
Fiery automatically.

Setting up the DTP41

Before you calibrate the Fiery, you must connect, configure, and
calibrate the spectrophotometer to prepare for measuring the
printed patches. For additional information about setting up and
using the DTP41, see the documentation included with the
instrument.
measurement page slot.
Sharp AR-C360P EFI Color Guide - 97