Cmyk Simulation Method - Sharp AR-C360P Color Manual

1
1-27 Managing color on the Fiery
With the Windows printer drivers, you can also view an unlimited
number of custom Full simulations created using ColorWise Pro
Tools. On Mac OS computers, you can view up to 10 Full custom
simulations. The number of custom simulations is limited by the
disk space on the Fiery.
If you are printing with the PostScript driver from a Windows
computer and have Two-Way Communication enabled, the name
of each downloaded or custom profile is represented in the CMYK
Simulation Profile setting menu. If you are printing with the
AdobePS driver from a Mac OS computer, downloaded or custom
profiles appear as Simulation-1 through Simulation-10. For more
information on Two-Way Communication, see the
Installation Guide
The None setting sends your original CMYK data to the printer in
its calibrated state, without conversions to simulate another
printer.
The CMYK Simulation Profile setting you specify depends on the
press standard for which the CMYK data was separated.
• For images that were separated using a custom separation (such
as a separation produced with an ICC profile), choose the
corresponding profile on the Fiery with the CMYK Simulation
Profile setting.
• For images that were separated for SWOP, choose SWOP as the
CMYK Simulation Profile setting.
To properly simulate a printed image that was separated
Note:
through the use of an ICC profile, the same profile must be
present on the Fiery. For more information about downloading ICC
profiles to the Fiery, see

CMYK Simulation Method

The CMYK Simulation Method allows you to define your preferred
CMYK-to-CMYK conversion technique.
Sharp AR-C360P EFI Color Guide - 27
Chapter 1.
"Downloading profiles"
User Software
on page 3-66.