A
A-105 Color Measurement Instruments
Using the X-Rite DTP32 densitometer
ColorWise Pro Tools are designed to work with the X-Rite DTP32
reflection densitometer, which feeds color measurements to the
Fiery automatically.
Measurements from other densitometers can be input using
Note:
a simple ASCII file format (see
Setting up the DTP32
Before you calibrate the Fiery using the X-Rite DTP32, you need to
connect, configure, and calibrate the densitometer to prepare for
measuring the printed patches (see
page A-107). For additional information about setting up and
using the DTP32, see the separate documentation included with
the densitometer.
To connect the X-Rite DTP32 to the computer
1. Turn off the computer.
2. Plug the square end of the interface cable (looks like a modular
phone plug) into the I/O port on the side of the X-Rite DTP32.
Sharp AR-C360P EFI Color Guide - 105
Appendix
B).
"Calibrating the DTP32"
on
Square
connector