Calibrating The Dtp32 - Sharp AR-C360P Color Manual

A
A-107 Color Measurement Instruments
4. Plug the small connector on the adapter cable into the side of the
Small connector
AC adapter
5. Turn on the computer.
6. Calibrate the DTP32 (see the following section).
7. Calibrate the Fiery using ColorWise Pro Tools and the DTP32 (see
To calibrate the X-Rite DTP32
1. Connect the densitometer to the computer and supply power (see
2. From the Main Menu on the X-Rite DTP32 display, press the p1
3. Press the cal key.
X-Rite DTP32 and plug the AC adapter into a wall outlet.
page 2-61).

Calibrating the DTP32

You will need the black-and-white X-Rite Auto-Cal Strip included
with the densitometer. Calibrating the densitometer does not
require ColorWise Pro Tools.
page A-105).
key once to reach p2.
Calibrating motor speed
.
CAL STRIP
Sharp AR-C360P EFI Color Guide - 107
is displayed, followed by the words INSERT