Color Editor; Editing Profiles - Sharp AR-C360P Color Manual

3
3-72 ColorWise Pro Tools
preceding example for defining Simulations profiles. However,
note these differences:
For output profiles, the predefined custom names are Output-1
through Output-10.
When you choose Profile Settings for an output profile, the Use
Calibration Set options also appear. You must calibrate the Fiery
with this calibration set before this option has any effect. If you
have never measured for this calibration set, default
measurements are used. For more information about calibration
sets, see page

Color Editor

Color Editor allows you to customize simulation and output
profiles. Access Color Editor directly by clicking its icon in the
ColorWise Pro Tools main window, or indirectly, through the Profile
Manager.

Editing profiles

Color Editor allows you to create custom profiles by editing
existing simulation or output profiles and saving the changes as a
new profile. Use Color Editor to fine-tune a profile on your Fiery to
meet your exact specifications. For example, you can create a
custom profile for printing to a specific media type.
You cannot edit source profiles; only simulation and output
Note:
profiles can be customized.
Color Editor has two Edit Modes for editing output profiles:
• —Edit output profiles and save customized versions of
Custom
them.
•
% Density
of the output profile. You cannot make changes to the
calibration target in this window, but you can import a new
target (see
Sharp AR-C360P EFI Color Guide - 72
2-40.
—View the calibration target, which is one component
page 2-40).