Sharp AR-C360P Color Manual page 77

3
3-77 Color Editor
A curve with this
shape makes a color
appear
lighter by reducing
density in the
midtones.
A curve with this
shape increases
contrast.
9. For an output profile, set maximum densities of the C, M, Y, and K
10. When you are finished, click Save and enter a name for the new
Adjust points in this way only after you have entered the
Note:
Dot Gain and Brightness values.
For greater precision, type percentages in the Input and Output
fields or use the arrow keys on the keyboard to adjust the curve.
To use the arrow keys, you must first click the curve to establish
an anchor point that serves as a reference.
channels.
Enter the maximum densities, called D-Max values, of individual
colors for profiles that support density settings. D-Max settings
are not available when you edit Simulation profiles in Master
mode.
profile.
The new custom profile is saved to the Fiery with the new name.
If you edit one of the press standard targets (for example, SWOP-
Coated, DIC, or Euroscale), consider including the original name
as part of the new target name (for example, DIC-new) to help
you remember the source of the new target.
Sharp AR-C360P EFI Color Guide - 77
A curve with this
shape makes a
color appear
darker by adding
density in the
midtones.