Setting The Default Profiles - Sharp AR-C360P Color Manual

3
3-65 Profile Manager
•
SWOP-Coated
In addition, one or more output profiles are provided with the
Fiery. For information about output profiles, see
When you use Profile Manager from some Windows NT
Note:
computers, the default color directory may not be created
automatically when ColorWise Pro Tools are installed. Create the
color folder in the appropriate directory (for example,
C:\WinNT\system32\color) and Profile Manager will be able to
download and upload from the default location as expected.

Setting the default profiles

You can use Profile Manager to set a default RGB source profile,
simulation profile, and output profile. The default RGB source and
simulation profiles that you set are applied to all print jobs sent to
the Fiery, unless you override them using print options. The same
is true of the default output profile that you set.
To specify a default profile
1. Start ColorWise Pro Tools and click Profile Manager.
The left side of the main Profile Manager window lists the ICC
profiles in the default directory of your computer; the right side
lists the three profiles on the Fiery.
The Lock icon (
profile cannot be deleted and can be edited only if saved under a
new name. Only Simulation and Output profiles can be edited.
A small icon to the left of a profile name indicates the default
profile for each category (RGB Source, Simulation, and Output). If
you designate a different profile as the default, the icon appears
next to your designated profile. The icon indicating the default
RGB Source and Output profiles looks like a target (
indicating the default Simulation profile changes in appearance
depending on whether the default RGB Separation setting is set to
Simulation (
Sharp AR-C360P EFI Color Guide - 65
—United States press standard
) to the left of a profile name indicates that the
) or Output ( ).
page 1-29.
). The icon