Calibrating The Fiery With The Es-1000 - Sharp AR-C360P Color Manual

2
2-50 Color Calibration
Measure button
Sample aperture
White tile
reference
To calibrate the Fiery using the ES-1000
1. Start Calibrator.
2. Choose EFI Spectrometer ES-1000 as the measurement method.
3. In the Check Print Settings pane, choose the desired calibration
The following illustration shows the different parts of the ES-1000.

Calibrating the Fiery with the ES-1000

You can use ColorWise Pro Tools in conjunction with the ES-1000
to calibrate the Fiery.
For instructions on starting Calibrator, see
set.
Choose the appropriate calibration set for the mode and type of
media which are needed for calibration.
For this calibration to take effect, the calibration set must be
Note:
associated with one or more output profiles. There is no need to
make any new associations for the default calibration set, since it
is already associated with the default output profile.
Sharp AR-C360P EFI Color Guide - 50
Calibration cradle
page 2-44.