An Overview Of Calibration - Sharp AR-C360P Color Manual

2

2-39 An overview of calibration

An overview of calibration
Calibration generates curves that adjust for the difference
between the actual toner densities (measurements) and the
response expected by the output profile.
• Measurements represent the actual color behavior of the printer.
• Calibration sets are sets of measurements.
• A calibration target that describes the expected behavior of the
printer is contained in each output profile.
After you have calibrated the Fiery, a calibration set is stored. This
calibration set will be used when it is associated with an output
profile. Every output profile has an associated calibration set. If
you have not specified one, the calibration set associated with the
default output profile is used.
If you change the calibration after a saved job has been processed
(RIPped), you do not need to reprocess (reRIP) the job. The new
calibration affects the job without a need for reprocessing.
Changing calibration has the potential to affect all jobs for
Note:
all users, so consider limiting the number of people authorized to
perform calibration. Set an Administrator password in Fiery Setup
to control access to calibration (see the Configuration Guide
Chapter 7).
Sharp AR-C360P EFI Color Guide - 39