Sharp AR-C360P Color Manual page 60

2
2-60 Color Calibration
A check mark
appears on the
circle of the color
just read, and the
Status field
indicates the
color was
measured
successfully.
Click Previous
and Next to
reverse or
advance to
another step in the measurement sequence.
13. When the Status field indicates that all four color strips have been
read successfully, click Accept Measurements.
14. In the Measure dialog box, click OK.
15. Click Apply in the Calibrator window to implement the new
calibration set.
16. Click OK in the Information dialog box.
This completes the Fiery calibration process.
Sharp AR-C360P EFI Color Guide - 60