Sharp AR-C360P Color Manual page 55

2
2-55 Using the EFI Densitometer ED-100
7. Click Measure in the Get Measurements pane.
The Measurement Options dialog
box appears.
8. Choose the appropriate options, and
then click Start.
Page Type is automatically set to
the measurement page type that
you printed in
Use the arrow buttons next to the
Clicks Per Patch field to choose the
number of measurements you want
to take for each patch on the page. When you choose multiple
clicks, the average value of all measurements taken for the patch
is returned to the Fiery. Multiple measurements are more
accurate, but may take more time.
To hear a confirmation tone each time a measurement is
recorded, select the Audio Feedback option. A single tone
indicates a successful measurement; two tones indicate a
measurement error. If you have specified multiple clicks per
patch, the tone sounds after you take the final measurement.
If necessary, choose the appropriate COM port for the ED-100
from the Port menu.
Sharp AR-C360P EFI Color Guide - 55
step 5.