Sharp AR-C360P Color Manual page 70

3
3-70 ColorWise Pro Tools
1 through Source-10 for RGB Source, Simulation-1 through
Simulation-10 for Simulation, or Output-1 through Output-10 for
Output.
For Windows computers, all profiles appear by their actual names
in the printer driver. These fixed names are used in the printer
driver, so you can select profiles per job even if your driver does
not have the capability to obtain an updated list from the Fiery.
A custom simulation profile is used to illustrate this
Note:
procedure. The same steps apply for defining output profiles.
To define a custom simulation profile
1. Start ColorWise Pro Tools and click Profile Manager.
For the purposes of this example, assume DIC-new is a custom
simulation profile created with Color Editor and, as such, no
information is displayed for DIC-new under the heading "Appear in
Driver as."
You can define custom profiles only. Default profiles are
Note:
predefined and cannot be changed.
2. Select DIC-new in the Simulation list, and click Profile Settings or
double-click DIC-new.
Sharp AR-C360P EFI Color Guide - 70
Custom profile
created with
Color Editor