Guidelines For Using 1130Ag Series Lightweight Access Points; Using Dhcp Option 43; Checking The Lightweight Access Point Leds - Cisco Aironet 1130AG Series Hardware Installation Manual

Hide thumbs Also See for Aironet 1130AG Series:
Table of Contents

Advertisement

OL-8369-04
OL-8369-04
   

Guidelines for Using 1130AG Series Lightweight Access Points

Guidelines for Using 1130AG Series Lightweight Access Points

Guidelines for Using 1130AG Series Lightweight Access Points
Guidelines for Using 1130AG Series Lightweight Access Points

Using DHCP Option 43

Using DHCP Option 43

Checking the Lightweight Access Point LEDs

Checking the Lightweight Access Point LEDs

Keep these guidelines in mind when you use a 1130AG series lightweight access point:
Keep these guidelines in mind when you use a 1130AG series lightweight access point:
• •
The access points can only communicate with Cisco 2006 series or 4400 series controllers.
The access points can only communicate with Cisco 2006 series or 4400 series controllers.
Note
Note
Cisco 4100 series, Airespace 4012 series, and Airespace 4024 series controllers are not
Cisco 4100 series, Airespace 4012 series, and Airespace 4024 series controllers are not
supported because they lack the memory required to support access points running Cisco
supported because they lack the memory required to support access points running Cisco
IOS software.
IOS software.
• •
The access points do not support Wireless Domain Services (WDS) and cannot communicate with
The access points do not support Wireless Domain Services (WDS) and cannot communicate with
WDS devices. However, the controller provides functionality equivalent to WDS when the access
WDS devices. However, the controller provides functionality equivalent to WDS when the access
point associates to it.
point associates to it.
• •
The access points support eight BSSIDs per radio and a total of eight wireless LANs per access
The access points support eight BSSIDs per radio and a total of eight wireless LANs per access
point. When a lightweight access point associates to a controller, only wireless LANs with IDs 1
point. When a lightweight access point associates to a controller, only wireless LANs with IDs 1
through 8 are pushed to the access point.
through 8 are pushed to the access point.
• •
The access points do not support Layer 2 LWAPP. They must get an IP address and discover the
The access points do not support Layer 2 LWAPP. They must get an IP address and discover the
controller using DHCP, DNS, or IP subnet broadcast.
controller using DHCP, DNS, or IP subnet broadcast.
• •
The access point console port is enabled for monitoring and debug purposes (all configuration
The access point console port is enabled for monitoring and debug purposes (all configuration
commands are disabled when connected to a controller).
commands are disabled when connected to a controller).
You can use DHCP Option 43 to provide a list of controller IP addresses to the access points, enabling
You can use DHCP Option 43 to provide a list of controller IP addresses to the access points, enabling
the access point to find and join a controller. For additional informataion, refer to the "Configuring
the access point to find and join a controller. For additional informataion, refer to the
DHCP Option 43 for Lightweight Acce
DHCP Option 43 for Lightweight
If your access point is not working properly, check the Status LED on the top panel or the Ethernet and
If your access point is not working properly, check the Status LED on the top panel or the Ethernet and
Radio LEDs in the cable bay area. You can use the LED indications to quickly assess the unit's status.
Radio LEDs in the cable bay area. You can use the LED indications to quickly assess the unit's status.
Fig
Figur ure
e
4- 4-1
1
 shows the access point LEDs.
 shows the access point LEDs.
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
Cisco Aironet 1130AG Series Access
Chapter 4 4
Chapter
 
 
Access Points" secti
ss Points"
section on page
on on page
Point Hardware Installation Guide
Troubleshooting Lightweight
Troubleshooting
Lightweight Access
Access Points
"Configuring
G-1. .
G-1
4-1
4-1
Points

Advertisement

Table of Contents
loading

Table of Contents