Unpacking The Access Point; Package Contents - Cisco Aironet 1130AG Series Hardware Installation Manual

Chapter 2 2 Chapter Installing Installing the
Warning Warning
Warning Warning
Warning Warning

Unpacking the Access Point

Unpacking the Access Point

St Step ep 1 1
St Step ep 2 2
St Step ep 3 3

Package Contents

Package Contents
OL-8369-04 OL-8369-04
the Access Access Point Point
Do not work on Do not work on the system or connect or disconnect cables during periods of the system or connect or disconnect cables during periods of lightning activity.
Statement 1001 Statement 1001
Read the installation instructions before you connect the system to its power source. Read the installation instructions before you connect
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that
the protective device is rated not greater than: 20A the protective device is rated not greater than: 20A
Follow these steps to unpack the access point: Follow these steps to unpack the access point:
Open the shipping container and carefully remove the contents. Open the shipping container and carefully remove the contents.
Return all packing materials to the shipping container and save it. Return all packing materials to the shipping container and save it.
Ensure that all items listed in the "Package Contents" section are included in the shipment. Check each Ensure that all items listed in the "Package Contents" section are included in the shipment. Check each
item for damage. If any item is damaged or missing, notify your authorized Cisco sales representative. item for damage. If any item is damaged or missing, notify your authorized Cisco sales representative.
Each access point package contains the following items: Each access point package contains the following items:
• • Cisco Aironet 1130AG Series Access Point or Cisco Aironet 1130AG Series Lightweight Access Cisco Aironet 1130AG Series Access Point or Cisco Aironet 1130AG Series Lightweight Access
Point Point
• • Cisco Aironet 1130AG Series Power Module (universal power module)–optional Cisco Aironet 1130AG Series Power Module (universal power module)–optional
• • Mounting hardware kit Mounting hardware kit
One mounting plate One mounting plate
– –
Two suspended ceiling adjustable T-rail clips (accomodates standard and recessed T-rails) Two suspended ceiling adjustable T-rail clips (accomodates standard and recessed T-rails)
– –
One security hasp adapter One security hasp adapter
– –
Four 6 x 32 x ¼ in. Four 6 x 32 x ¼ in.
– –
One 8 x 32 x 3/16 in. pan head Phillips machine screw One 8 x 32 x 3/16 in. pan head Phillips machine screw
– –
2 #8 plastic wall anchors 2 #8 plastic wall anchors
– –
2 #8 x 32 x 1 in. pan head screws 2 #8 x 32 x 1 in. pan head screws
– –
• • Product quick start guide Product quick start guide
• • Translated safety warnings document Translated safety warnings document
• • Cisco product registration and Cisco documentation feedback cards Cisco product registration and Cisco documentation feedback cards
the system to its power source.
Statement 1005 Statement 1005
flat head Phillips machine screws flat head Phillips machine screws
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide Cisco Aironet 1130AG Series Access
Unpacking the Access Point Unpacking the Access Point
lightning activity.
Statement 1004 Statement 1004
Point Hardware Installation Guide
2-3 2-3