Safety Information; Fcc Safety Compliance Statement; General Safety Guidelines - Cisco Aironet 1130AG Series Hardware Installation Manual

Safety Information

Safety Information

Safety Information Safety Information

FCC Safety Compliance Statement

FCC Safety Compliance Statement

General Safety Guidelines

General Safety Guidelines
Warnin War nings gs
Warning Warning
Warning Warning
Warning Warning
Warning Warning
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide Cisco Aironet 1130AG Series Access Point
2-2 2-2
Follow the guidelines in this section to ensure proper operation and safe use of the access point. Follow the guidelines in this section to ensure proper operation and safe use of the access point.
The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio
frequency (RF) electromagnetic energy emitted by FCC certified equipment. When used with approved frequency (RF) electromagnetic energy emitted by FCC certified equipment. When used with approved
Cisco Aironet antennas, Cisco Aironet products meet the uncontrolled environmental limits found in Cisco Aironet antennas, Cisco Aironet products meet the uncontrolled environmental limits found in
OET-65 and ANSI C95.1, 1991. Proper installation of this radio according to the instructions found in OET-65 and ANSI C95.1, 1991. Proper installation of this radio according to the instructions found in
this manual will result in user exposure that is substantially below the FCC recommended limits. this manual will result in user exposure that is substantially below the FCC recommended limits.
• • Do not hold any component containing a radio so that the antenna is very close to or touching any Do not hold any component containing a radio so that the antenna is very close to or touching any
exposed parts of the body, especially the face or eyes, while transmitting. exposed parts of the body, especially the face or eyes, while transmitting.
Translated versions of all safety warnings are available in the safety warnin Translated versions of all safety warnings are available in the safety warnin g document that shipped wi
your access point or on Cisco.com. To browse to the document on Cisco.com, refer to App your access point or on Cisco.com. To browse to the document on Cisco.com, refer to
"Translated Safety "Translated Safety Warnings" Warnings" for instructions.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. Y This warning symbol means danger. You are in a
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end with standard practices for preventing accidents. Use the
each warning to locate its translation in the translated safety warnings that accompanied this device. each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071 Statement 1071
SAVE THESE INSTRUCTIONS SAVE THESE INSTRUCTIONS
Do not operate your wireless network device near unshielded blasting caps or in an explosive Do not operate your wireless network device near unshielded blasting caps or in an explosive
environment unless the device has been modified to be especially qualified for such use. environment unless the device has been modified to be especially qualified for such use.
Statement 245B Statement 245B
In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a
minimum of 7.9 inches (20 cm) or more from the body of all persons. minimum of 7.9 inches (20 cm) or more from the body of all persons.
This product must be connected to a This product must be connected to a power-ove
IEC60950 compliant limited power source. IEC60950 compliant limited power source.
Hardware Installation Guide
for instructions.
ou are in a situation that could cause bodily injury. Before you situation that could cause bodily injury. Before you
power-over-ethern r-ethernet (PoE) IEEE et (PoE) IEEE 802.3af compliant power source or
Statement 353 Statement 353
Chapter 2 2 Chapter Installing the Installing
g document that shipped wi th th
Append
statement number provided at the end of of
Statement 332 Statement 332
802.3af compliant power source or an an
the Access Access Point Point
endix ix A, A,
OL-8369-04 OL-8369-04