Advertisement
MULTI-MON
Parameter
Options
Unchecked
TOU
Checked
Unchecked
Use Profl
Checked
Unchecked
Dmd Profl
Checked
Unchecked
Sum Profl
Checked
Units
kWh, kvarh, kVAh
None
kWh IMPORT
kWh EXPORT
kvarh IMPORT
Source
kvarh EXPORT
Input
kVAh TOTAL
Submeter 1 -
Submeter 40
Multiplier
0.001 to 100.000
Target
1
Linking a submeter to another totalization submeter connects all its configured energy registers to the corresponding registers
of the target submeter.
Totalization Submeters
If you wish to automatically totalize energy measured by a number of submeters by using a separate totalization submeter, select
a source submeter in the Source Input column on the Register Source List pane (starting with source 5), and then select the
desired target totalization submeter in the Target column. Repeat these steps for all source submeters while selecting the same
totalization submeter as the target.
Selecting a submeter as a target automatically connects all active energy registers of the source submeters to its energy
registers, thus making it a totalization submeter. Note that each totalization submeter takes its own communication address in a
sequential order along with the metering submeters (see Submeter Addressing).
31-00035—01
Default
Billing/TOU Registers
Links tariff registers to the selected energy source
Unchecked
Enables automatic daily profiling for energy usage registers (both total and tariff
Unchecked
registers if TOU is enabled)
Enables automatic daily profiling for maximum demand registers (both total and tariff
Unchecked
registers if TOU is enabled)
Enables daily profiling for summary registers (total of all tariffs). Automatically set when
Unchecked
profiling is enabled.
The register measurement units. It is set automatically.
None
Register Source List
Links an energy source to the target register of all metering submeters, or links all
None
registers of a source submeter to a totalization submeter.
1
0.100
The multiplication factor for the energy source.
Defines the target register for the energy source. It is set automatically for target
None
energy registers.
Description
38
Advertisement
