Advertisement
The following table lists available options. Refer to your eXpertPower service provider for the correct eXpertPower settings.
Parameter
XPW Server IP Address
XPW Server Port
XPW Client Enabled
Time to Next Session, min
Time to close the Session, min
NOTES:
1.
If you do not use the eXpertPowerTM service, do not enable the eXpertPower client in your device.
2.
Do not change the connection period setting. The eXpertPower server updates it automatically.
General Meter Setup
This section describes how to configure the Multi-Mon for your particular environment and application using Power Software.
Basic Meter Setup
Before operating your meter, provide the device with basic information about your electrical network.
To enter the setup dialog, select the device site from the list box on the Power Software toolbar, and then select General Setup
from the Meter Setup menu.
Fig. 26.
Options
Default
207.232.60.18
0-65535
5001
NO,
NO
YES
1-99999
1-n
1
29
Description
The IP address of the eXpertPower server
The TCP service port of the eXpertPower server
Enables operations of the eXpertPower client
The time remaining to the next connection session
The time to keep session open while in idle state, it is strongly
to recommend to setup no more than 5 min.
MULTI-MON
31-00035—01
Advertisement
