Honeywell Multi-Mon Installation Instructions Manual page 45

Multiple circuit energy monitor

7. After upgrading firmware is completed, the device restarts. If the meter is connected to your PC through the modem, com-

munications can be temporarily lost and you may need to wait until Power Software restores a connection with your device.

DATA MONITORING

Viewing Real-Time Data

Real-time data can be continuously retrieved from the Multi-Mon submeters, updated on the screen at the rate you defined in the

Instrument Setup, and recorded to a file. You can view acquired data in a tabular or in a graphical form as a data trend.

For information on the real-time data monitoring and recording options, see the Power Software Getting Started Guide.

To get data from all submeters in a single window, click on the Multi-meter View button on the local toolbar.

Any energy and maximum demand registers in the Multi-Mon submeters can be read and recorded to files through the Power

Software Data Monitor.

Retrieving Log Files

Using Power Software, you can retrieve the event and data log files from the Multi-Mon submeters and save them to files on your

PC in the MS Access database format.

Fig. 43.

Fig. 44.

MULTI-MON

31-00035—01