Advertisement
Reset
This menu allows you to reset maximum demands in each submeter and to clear the device
diagnostics.
To enter the menu, select the Reset entry from the main menu, and then press the ENTER button.
To reset the desired registers:
1. Highlight the upper-right item by briefly pressing the SELECT button.
2. Select the submeter you are going to clear with the UP/DOWN buttons.
3. Highlight the lower-left item by pressing the SELECT button.
4. Scroll through the list with the UP/DOWN buttons until the desired entry appears.
5. Press the SELECT button to highlight the lower-right item.
6. Press and hold the ENTER button for 5 seconds. The "Do" entry is replaced with "Done" showing
the operation is complete.
To exit the menu, highlight the menu name (upper-left item) with the SELECT button, and then press
the ENTER button.
The following table lists reset options.
Label
Diag.
Pow.Dmd
Amp.Dmd
Max.Dmd
Real Time Clock Setting
This menu allows you to adjust internal real time clock.
To enter the menu, select the RTC entry from the main menu, and then press the ENTER button.
To adjust the clock:
To enter the menu, select the Reset entry from the main menu, and then press the ENTER button.
To reset the desired registers:
1. Highlight a time or date item you want to change item by briefly pressing the SELECT button.
2. Adjust the selected item with the UP/DOWN buttons.
3. Highlight the next item you want to change and adjust it in the same manner.
4. To store your new date and time, press the ENTER button. If you confirm the time change while
the seconds item is highlighted, the seconds' reading will be zeroed, otherwise seconds stay
unchanged.
To exit the menu, highlight the menu name (upper-left item) with the SELECT button, and then press
the ENTER button.
Parameter
Clears device diagnostics status
Clears maximum power demands
Clears maximum ampere and volt demands
Clears all maximum demands
19
MULTI-MON
31-00035—01
Advertisement
