Advertisement
MULTI-MON
Local Settings
The Local Settings setup allows you to specify your time zone and daylight saving time options.
To configure the time zone options for your device, select the device site from the list box on the Power Software toolbar, select
General Setup from the Meter Setup menu, and then click on the Local Settings tab.
The available options are described in the following table:
Parameter
Country code
Default, or country
name
Daylight saving time
Disabled
option
Enabled
Month-week-
weekday
DST start month
DST start week
Week = 1
DST start weekday
th
4
or Last (last week
of the month)
Month-week-
DST end month
weekday
DST end week
Week = 1
DST end weekday
th
4
or Last (last week
of the month)
When the daylight saving time is enabled, the Multi-Mon automatically adjusts the device clock at 02.00 AM when daylight saving
time begins/ends. The default daylight saving time change points are set for the U.S.A.
If the daylight saving time option is disabled, you need to manually adjust the device clock for daylight saving time.
31-00035—01
Options
Default
Default
Disabled
First
st
nd
rd
, 2
, 3
,
Sunday in
April
Last
st
nd
rd
, 2
, 3
,
Sunday in
October
Fig. 30.
Defines a currency and calendar settings. The default setting stands for the U.S.A.
When DST is disabled, the RTC will operate in standard time only. When enabled, the
device will automatically update the time at 2:00 AM at the pre-defined DST switch
dates.
The date when Daylight Saving Time begins. The DST switch point is specified by the
month, week of the month and weekday. By default, DST starts at 2:00 AM on the first
Sunday in April of each year.
The date when Daylight Saving Time ends. The DST switch point is specified by the
month, week of the month and weekday. By default, DST ends at 2:00 AM on the last
Sunday in October of each year.
34
Description
Advertisement
