Advertisement
MULTI-MON
Diagnostics Display
The diagnostics display shows a list of the device diagnostic
codes recorded as a result of the meter self-test diagnostics.
The diagnostics page is only displayed if errors were detected.
See Device Diagnostic Codes in Appendix F for the list of
diagnostic codes and their meanings. See Device Diagnostics
in Section 2 for more information on the Multi-Mon built-in
diagnostics. See Reset in Section 3 on how to clear the device
diagnostics status from the display.
Navigating in Menus
The Multi-Mon setup is menu-driven. To enter the setup
menus, press the SELECT button for more than 5 seconds.
31-00035—01
Selecting Menus
The main menu is represented by two entries; the left item shows a menu list, while the right item is an
assisting exit window that allows easy returning to the display mode. Flashing highlights a currently
active menu item (in the following diagrams, a highlighted item is pointed out by using a bold font). To
highlight a desired menu item, press briefly the SELECT button.
To select a menu entry from the menu list:
1. Highlight the left item by briefly pressing the SELECT button if it is not highlighted yet.
2. Scroll through the menu list by briefly pressing the UP and DOWN buttons until the desired menu
entry appears.
3. Press the ENTER button.
To exit the main menu:
1. Highlight the Exit item by briefly pressing the SELECT button.
2. Press the ENTER button.
Entering Numbers
Each digit in numbers is adjusted separately with the UP/
DOWN buttons. A brief press on the button increments or
decrements the highlighted digit by one. A highlighted digit is
flashing twice per second. To move to the next digit, press
briefly the SELECT button.
When the number is set to a desired value, press briefly the
ENTER button to store your new setting.
Entering a Password
The setup menus are secured by an 8-digit user password. If
the password entered is correct, you will move to the main
menu, otherwise you will return to the display mode.
16
Advertisement
