Advertisement
MULTI-MON
Uploading Setups
To upload the setups from the submeter to the site database, check the Online button on the Power Software toolbar, select the
submeter site from the list box on the toolbar, and then select Upload Setups from the Meter Setup menu.
Authorization
If communications with your device is secured, you are prompted for the password when you send new setup data to the
Multi-Mon.
Fig. 24.
Enter the password and click OK. If your authorization was successful, you are not prompted for the password again until you
close the dialog window.
Changing Port Settings
This section describes how to configure communication ports in the Multi-Mon through Power Software.
The communication settings affect all submeters in your device.
Setting Up Communication Ports
To enter the setup dialog, select the site from the list box on the Power Software toolbar, select Communications Setup from the
Meter Setup menu, and then click on the Serial Ports Setup tab. In the Port box, select the desired device port.
27
31-00035—01
Advertisement
