Mount The Chassis On A Desktop - Cisco Catalyst 8300 Series Hardware Installation Manual

Install and Connect
• Set the chassis on a desktop
• Attach the chassis to the wall
• Mount the chassis on a rack
Note
Warning
Caution

Mount the Chassis on a Desktop

Warning
Step 1 Attach the elastomeric mount feet (label 1) to the bottom of the device. The feet come with a pre-applied
adhesive. Place the feet in the locations marked by a circle.
Step 2 You can place the device on a desktop, bench top, or shelf.
C8300-2N2S-4T2X|6T support only rack mount, does not support wall mount or desktop mount options.
Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord
that is in the chassis. Statement 1
To prevent damage to the chassis, do not attempt to lift or tilt the chassis by holding it by the plastic
panel on the front. Always hold the chassis by the sides of the metal body.
To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the
handles on modules (such as power supplies, fans, or cards); these types of handles are not designed to
support the weight of the unit. Statement 1032
Hardware Installation Guide for Cisco Catalyst 8300 Series Edge Platforms
Mount the Chassis on a Desktop
31