Install And Connect; Safety Warnings - Cisco Catalyst 8300 Series Hardware Installation Manual

Install and Connect

This chapter describes how to install and connect the Cisco Catalyst C8300 Series Edge Platforms to LAN,
WAN, and Voice networks.
Note
The following sections provide the technical details:
•
•
•
•
•
•
•
•
•

Safety Warnings

Warning
Warning
These routers are designed to boot up in less than 30 minutes, provided the neighboring devices are in
fully operational state.
Safety Warnings, on page 29
What You Need to Know, on page 30
Before You Begin, on page 30
Unpack the Device, on page 30
Install the Device, on page 30
Connect Power to the Device, on page 47
Connect to a Console Terminal or Modem, on page 49
Install the Silicon Labs USB Device Driver, on page 50
Connect WAN and LAN Interfaces, on page 51
To comply with Class A emissions requirements- shielded management Ethernet, CON, and AUX cables
on the router must be used.
To comply with the Class A emissions requirements shielded twisted pair T1/E1 cables must be used
for SPA-8-Port Channelized T1/E1 SPA (SPA-8XCHT1/E1) on the router. EN55022/CISPR22 Statement
Hardware Installation Guide for Cisco Catalyst 8300 Series Edge Platforms
3
C H A P T E R
29