Chapter 6 Overview Of Coupler; Coupler Common Part Names - Mitsubishi Electric NZ2FTGN User Manual

6
OVERVIEW OF COUPLER
6.1

Coupler Common Part Names

The section describes the name of each part of the coupler.
Ex.
For the NZ2FT-EIP
(1)
(2)
(13)
(14)
No. Name
(1) DIN rail fixing lever
(2) Network interface
(3) Connector frame open button
(4) Coupler LED
common part
(5)
(6) Coupler LED
specific part
6 OVERVIEW OF COUPLER
94
6.1 Coupler Common Part Names
(5) (1)
(4)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(15)
Description
Removes/attaches the module from/to a DIN rail. ( Page 38 Installation procedure of modules)
Connect a network cable. ( Page 46 Wiring of network cable)
Opens the connector frame. ( Page 52 Connector replacement)
Power supply LED Indicates the power supply status.
On in green: No error
On in red: Supply voltage of the input power supply or output power supply < 18VDC, or internal fuse
failure
Fieldbus/coupler Indicates the communication and operating status of the coupler.
status LEDs
(3)