Connection With A Personal Computer; Via Usb Port - Mitsubishi Electric NZ2FTGN User Manual

4.1

Connection with a Personal Computer

When the personal computer and the coupler are connected and the Web server is accessed from a Web browser, the Web
server window is displayed.
There are two connection methods: via the USB port and via the Ethernet port.
On the NZ2FT-GN, when installing 10 or more I/O modules or performing cyclic transmission with a
communication cycle of less than 1ms, if the connection is made to a personal computer via the Ethernet port,
the performance of the Web server may deteriorate and the access may be slow. In such a case, connect to
the personal computer via the USB port.
If a proxy server is used, it may not be possible to connect to the Web server depending on the proxy server settings. If cannot
be connected to the Web server, correct the proxy server settings.

Via USB port

Operating procedure
1.
Install the following USB driver only for the first time. For the driver file, contact your local Mitsubishi representative.
• usb8023.inf
• merndis.inf
2.
Since the USB port of the coupler functions as a virtual DHCP server, check that the USB port of the personal computer
is set to automatically acquire an IP address. (The following window is for Windows 10)
4 WEB SERVER
60
4.1 Connection with a Personal Computer