Chapter 13 Overview Of I/O Modules; I/O Module Common Part Names - Mitsubishi Electric NZ2FTGN User Manual

13
OVERVIEW OF I/O MODULES
13.1

I/O Module Common Part Names

This section describes the names of the parts common to each I/O module.
Ex.
For the NZ2FTS4-4DE
(3)
(4) (4)
No. Name
(1) DIN rail fixing lever
(2) Connector frame open button
(3) Module status LED
(4) Connector part
(5) Base unit
(6) Electronic unit part
(7) Electronic unit part removal lever
(8) Plug-in unit part
(9) Connector frame
For the module status LED and LEDs on each connector, refer to the description of each I/O module.
13 OVERVIEW OF I/O MODULES
414
13.1 I/O Module Common Part Names
(1)
(2)
Description
Removes/attaches the module from/to a DIN rail. ( Page 38 Installation procedure of modules)
Opens the connector frame. ( Page 52 Connector replacement)
Indicates the communication and operating status of the module.
Connects external devices. ( Page 44 Connector part)
Fixes the electronic unit part and plug-in unit part in place.
Performs I/O data operation.
Is used to remove the electronic unit part. ( Page 55 Procedure for Hot swap)
Connector and connector frame.
Fixes the connector in place.
(5)
(7)
(6)
(9)
(4)
(8)