Chapter 8 Nz2Ft-Bt; Cc-Link Configuration; Corresponding Master Module And Software Package; Profiles - Mitsubishi Electric NZ2FTGN User Manual

8
NZ2FT-BT
This chapter describes the details of the CC-Link compatible coupler.
8.1

CC-Link Configuration

A CC-Link system is configured with a master station (1), remote I/O station (2), remote device station (3), intelligent device
station (4), local station (5), and terminating resistor (6).
The NZ2FT system using the NZ2FT-BT supports CC-Link Ver.1.10 and Ver.2.00 and operates as a remote device station.
(1) (2)
(6)

Corresponding master module and software package

The master module corresponding to the NZ2FT-BT and the software package corresponding to each master module are
shown.
For how to check the version, refer to the manual for each master module and software package.
Master module
Name
CC-Link system master/local module
CC-Link system master intelligent device module
In this manual, the RJ61BT11 is mainly explained as the master station, but it can be replaced with the
QJ61BT11N or FX5-CCL-MS. However, the FX5-CCL-MS does not support dedicated instructions.

Profiles

The profile for setting the NZ2FT-BT and I/O module must be registered in the software package. For information on how to
obtain the profile, contact your local Mitsubishi representative.
Registration Name
destination
software
package
• GX Works3 CC-Link profile for the NZ2FT-BT (CSP +
• GX Works2 file)
CC-Link profile for the I/O module (CSP +
file)
(4)
(3)
Model Version
RJ61BT11 Firmware version "05" or later
QJ61BT11N The serial number (first five digits) of
17012 or later
FX5-CCL-MS 1.000 or later
Release file name
0x0000_NZ2FT-BT_[Device version]_[Language].CSPP.zip
([Device version]: 0001 to 9999, [Language]: en)
0x0000_[Model name]_[Device version]_[Language]_CCLink.CSPP.zip
([Model name]: Model name of I/O module, [Device version]: 0001 to
9999, [Language]: en)
(5)
(6)
Software package
Product Version
name
GX Works3 1.045X or
later
GX Works2 1.68W or
later
GX Works3 1.045X or
later
Version
00 or later
00 or later
8 NZ2FT-BT
8.1 CC-Link Configuration
8
131