Removal Procedure Of Modules - Mitsubishi Electric NZ2FTGN User Manual

Removal procedure of modules

3 INSTALLATION AND WIRING
40
3.2 Installation
1.
Loosen the screw at the end plate on the right with
a 3mm flathead screwdriver.
2.
Slide the end plate to the right or remove it.
3.
Lift the DIN rail fixing lever of the right end module
(1) and slide the module to the right (2). After
(1)
sliding the module, lower the DIN rail fixing lever.
(2)
4.
Repeat procedure 3 for all modules located to the
right of the module to be removed.
5.
Lift the DIN rail fixing lever of the module to be
removed. Slide the module to right and remove it
from the DIN rail.