This chapter explains how to configure a wireless LAN (WLAN) using the browser interface. It
includes the following topics:
•
"Before You Begin" on page 5-1
•
"Basic WLAN Configuration in the Browser Interface" on page 5-4
•
"Advanced WLAN Configuration in the Browser Interface" on page 5-9
•
"IntelliFi RF Management" on page 5-19
Before You Begin
This section describes tasks that you need to do prior to configuring a WLAN.
You have a wide variety of options for authentication, encryption, access management, and user
rights when you configure a WLAN with a WFS709TP ProSafe Smart Wireless Switch. However,
you must configure the following basic elements:
•
A Service Set Identifier (SSID) that uniquely identifies the WLAN.
•
Layer 2 authentication to protect against unauthorized access to the WLAN. The
authentication method you choose determines the following:
•
Layer 2 encryption to ensure the privacy and confidentiality of the data transmitted to and
from the network.
•
An authentication server used to validate the user. Authentication can be performed using
an external authentication server, such as a RADIUS server, or the WFS709TP's internal
database.
•
A virtual local area network (VLAN) on the WFS709TP into which wireless clients who
successfully associate to the access point (AP) are placed.
Configuring WLANS
v1.0, June 2007
Chapter 5
5-1