NETGEAR ProSafe WFS709TP Software Administration Manual page 196

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
Figure B-3 shows the configuration for the ESSID WLAN-01 that uses dynamic WEP.
Figure B-3
8. Click the Authentication tab to enter the 802.1x authentication parameters for the ESSID.
This tab configures the EAP type used between the wireless client and the authentication
server.
9. Configure the following, as shown in
• Select Enable IEEE 802.1x authentication for this network.
• Select Protected EAP (PEAP) for the EAP type.
• Choose the authentication type.
• Select Authenticate as computer when computer information is available. The client
will perform computer authentication when a user is not logged in.
• Do not select Authenticate as guest when user or computer information is unavailable.
The client will not attempt to authenticate as a guest.
B-4
Figure B-4:
Windows Client Example Configuration for 802.1x
v1.0, June 2007