WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
Option 43 is configured for this DHCP scope. Note that even though you entered the IP
address in ASCII text, it displays in binary form
Figure A-2
Linux DHCP Servers
The following code is an example configuration for the Linux dhcpd.conf file.
Note: After you enter the configuration, you must restart the DHCP service.
option serverip code 43 = ip-address;
class "vendor-class" {
match option vendor-class-identifier;
}
.
.
.
A-4
(Figure
A-2).
Configuring DHCP with Vendor-Specific Options
v1.0, June 2007