802.1X Authentication Page - NETGEAR ProSafe WFS709TP Software Administration Manual

4. Configure the WLAN, specifying the authentication and encryption that matches the wireless
client configuration.

802.1x Authentication Page

In the browser interface, you configure 802.1x authentication in the Configuration > Advanced >
Security > Authentication Methods > 802.1x Authentication page
Figure 7-3
Table 7-1 describes the options on the 802.1x Authentication page:
Table 7-1. 802.1x Authentication Browser Interface Page Options
Parameter
Enable Authentication
Enable Termination
Enable Reauthentication
Configuring 802.1x Authentication
WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
Description
Enable 802.1x authentication.
Terminate 802.1x authentication on the WFS709TP
Select this option to force the client to do a 802.1x
re-authentication after the expiration of the default timer for
re-authentication. The default value of the timer is 24 hours
(see "Advanced Configuration Options for 802.1x" on
page 7-6). If the user fails to re-authenticate with valid
credentials, the state of the user is cleared.
v1.0, June 2007
(Figure 7-3).
Default
Disabled
Disabled
Disabled
7-5