Copying Log Files; Copying Other Files - NETGEAR ProSafe WFS709TP Software Administration Manual

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
3. Click Copy Backup to enter the Copy Files page where you can select the destination server
for the file.
4. Click Apply.
To restore the backup file to the flash file system:
1. Navigate to the Maintenance > File > Copy Files page.
a. For Source Selection, specify the server to which the flashbackup.tar.gz file was
previously copied.
b. For Destination Selection, select Flash File System.
c. Click Apply.
2. Navigate to the Maintenance > File > Restore Flash page.
3. Click Restore to restore the flashbackup.tar.gz file to the flash file system.
4. Navigate to the Maintenance > Switch > Reboot Switch page.
5. Click Continue to reboot the WFS709TP.

Copying Log Files

You can copy log files from the WFS709TP to an external TFTP or FTP server. The browser
interface allows you to copy the log files to a WinZip folder, which you can display or save on
your local PC.
To copy log files:
1. Navigate to the Maintenance > File > Copy Logs page.
2. For Destination, specify the TFTP or FTP server to log files are copied.
3. Select Download Lgs to download the log files into a WinZip file on your local PC.
4. Click Apply.

Copying Other Files

You can copy a file in the flash file system or a configuration file between the WFS709TP and an
external server.
To copy a file:
1. Navigate to the Maintenance > File > Copy Files page.
2. Select the source where the file or image exists.
13-18
v1.0, June 2007
Configuring Management Utilities